Xiaomi Roborock Sweep One S6 - improved version of the original S50. It vacuums 20% faster and is 50% quieter. Improved room planning allows you to select in advance to which room to send the vacuum cleaner.
Not in stock
Warning: Last items in stock!
The Roborock S6 is an improved version of the original S50. It offers more efficient vacuuming, which is now 20% faster with a better algorithm, 50% quieter operation, a larger water tank, and redesigned wiping. The vacuum cleaner design is very tasteful and elegant and fits into every apartment.
Roborock vacuum cleaners are one of the best on the market and yet considerably cheaper than the top competition. That's why they are so popular in the Czech market.
In addition to vacuuming, the Roborock S6 also offers wet wiping. If you have hard floors at your home - tiles, floating floors, or linoleum, mopping is also useful.
Quickly fill the 160ml tank with water, snap into the vacuum cleaner and wipe. With the S6, it is now possible to use disposable mopping cloths, which are included in the box (10pcs). However, there are also two pieces of microfiber cloth that can be washed and used repeatedly.
The new S6 model features two levels of water dripping. One is intended for daily usage and uses less water so as not to leave marks on the floor. The second one is designed for more severe stains: more water is released for a more intense cleaning session.
In this cleaning mode, it can work for 45 to 60 minutes for even more dirt removal and cleans up about 125 square meters. However, be sure to fill the water tank with the water and moisten the cloth before using it for the first time.
Mopping works really efficiently, one would say, unexpectedly, on such a simple system.
You also get a plastic pad on the floor to clean the floor so that the floor is not in contact with the cloth for a long time after wiping.
TIP: You can put a few drops of essential oil on the cloth. The vacuum cleaner will scent your home nicely!
The basis of any quality vacuum cleaner is a proper engine. Roborock S6 once again meets the powerful Japanese NIDEC engine, which has a suction pressure of up to 2000Pa and holds 0.67m3 of air per minute. It is thus one of the most powerful robotic vacuum cleaners on the market. The engine can even lift the AA battery and suction is effectively constant even when the dirt container is full.
The powerful engine comes in handy on long-haired carpets or when vacuuming along walls, which is the traditional weakness of other robotic vacuum cleaners. It is for this purpose that a small round brush is used to blow dirt and dust under the vacuum cleaner unit. The S6 has silicone bristles in the S6 generation, making it more efficient and gentle on furniture.
All impurities are collected in a 0.5 L container, and if necessary your vacuum cleaner warns you to empty the container.
A brand-new cleaning brush has boosted bristle density by 250%. Also, the bristles are softer too. Even when spinning at 1350rpm it is soft on your floors but hard on dust.
The air flow continues from the vessel through the large HEPA filter, where even small dust particles are trapped and are not discharged back into the air during vacuuming. The filter is also washable, which is undoubtedly great news for allergy sufferers and asthmatics.
The S6 vacuum cleaner has the same power as the previous generation. Advanced sound suppression design means S6 is not only 50% quieter than the S5. It sounds better as well. It turns the harshness of typical vacuum noise into a softer sound that doesn’t intrude, even during late night cleaning.
Most robots have trouble overcoming the thresholds in their rooms, so they can only suck the room where you put it. However, this robot can overcome barriers up to 2 cm. This undoubtedly comes in handy both on the thresholds between the rooms and on high pile carpets.
You can turn the vacuum cleaner on to a maximum suction force of up to 2000Pa.
You can see on the enclosed animation that the vacuum cleaner can handle millet, soybean, and even metal balls!
Roborock S6 equips fourteen different sensors. This is truly unmatched.
The most advanced laser sensor remains. Located up in a vacuum cleaner crown that rotates 360 ° and the sensor scans the entire area of your home for 1800x per second. The LDS laser sensor is very similar to that found in modern autonomous autopilot vehicles.
Besides, the vacuum cleaner includes an ultrasonic radar sensor, a stair detector, a wall detector, a full trash bin sensor , a collision detector, an electronic compass, a gyroscope, an accelerometer, a distance meter, a fan speed meter, and a lift detector.
The calculation of the optimal route is based on information from a laser sensor, distance meter, accelerometer and gyroscope using the advanced SLAM (Simultaneous Localization and Mapping) algorithm. There are three different and powerful processors for fast route calculation. This is another distinction from competing cheaper vacuum cleaners, which mostly measure the room route based on collisions with fixed obstacles. They don't have a first-class orientation in space and therefore are unable to suck up quite a large part of the area effectively.
The S6 generation has this algorithm further improved, sucking your home 20% faster than previous generations and remembering all the rooms. You can name them in the app and send the vacuum cleaner to different rooms at different times.
The wall detector is designed to be cleaned along the walls, while the vacuum cleaner does not hit them. The vacuum cleaner travels along the wall at a fixed distance of 10mm, and a small round brush ensures that this 10mm space is perfectly clean.
Intelligent carpet detection - a new feature when the vacuum cleaner recognizes the carpet, turns on the maximum power for the best vacuum. It returns to normal mode as soon as the robot leaves the carpet. Everything is fully automatic.
The other sensors are a pair of ultrasonic sensors at the front, transmitting and receiving signals at 340m/s, thus detecting the distance between the vacuum cleaner and the fixed obstacle. It does not happen that the vacuum cleaner hits a glass door, for example.
Four of the stair detector sensors keep the vacuum cleaner from falling, the distance meter measures how much a vacuum cleaner goes through its life, just like cars.
You can also forget about the new hair roll because the new vacuum cleaner is designed to prevent the hair from getting stuck in the engine.
The other support sensors watch the vacuum cleaner work and remind the user if there is a need to do anything. So if you accidentally forget to put a HEPA filter into the vacuum cleaner before the start, one of the sensors reminds you again.
The Roborock S6 equips with a high-capacity Li-Ion battery, with a capacity of 5200mAh. Cells come from LG / Panasonic companies.
This capacity is sufficient for up to 2.5 hours of continuous vacuuming, which is up to 250m2 of space. Of course, it always depends on the specific conditions.
An oval LED around the power button indicates the battery charge level. If it is white, the battery has more than 50% capacity, if it is orange, it is 20-50% full, but if it turns red, the battery is below 20% capacity. However, this may not bother you, in case of low battery level the vacuum cleaner goes to the charging station itself and after recharging it starts working again where it has stopped before.
Smart home control center.
Last but not least, there is the Mi Home control application on your smartphone! There are 3 processors in the vacuum cleaner that track its movement in real time. You can navigate your device by simply tapping to the area you want to clean. Also, you can create a virtual wall in your application, so the vacuum cleaner doesn't get into space you don't want. With this great feature, you can operate your vacuum cleaner efficiently and away from home, monitor the entire cleaning process, schedule cleaning time, and even name your new robot!
The app connects to your Xiaomi account, so you don't have to be at home to start the floor vacuuming.
With Roborock S6, you can use the Mi Home app to plan when and how often it vacuums, or give it a one-time vacuuming instruction, even if you sit at work. Furthermore, you can control the suction power and see the route that the vacuum cleaner went through during work.
The vacuum cleaner can also be shared on multiple accounts and can be controlled by everyone in the family.
- Roborock S6 vacuum cleaner in white or black
- Vacuum cleaner charging station with EU plug
- Water tank with disposable microfibre mop cloth (10pcs)
- Plastic vacuum cleaner pad
- Cleaning brush for cleaning hair and other dirt brushes
- Detailed instructions in book form with vacuum cleaner + video tutorial
Warranty: 24 months
|Other features:||Engine power 58W, suction pressure up to 2000pA, 14 sensors, SLAM route calculation algorithm, washable HEPA filter, wall cleaning, 160 ml water tank, rubber bumper|
|Dimensions:||351x353x91mm (vacuum cleaner); 230x109x129mm (charging station)|
|Battery:||14.4V / 5200mAh Li-Ion, built-in, up to 2.5 hours vacuuming|
|Output voltage:||20V (charging station)|
|Output current:||2,2A (charging station)|