Roborock Sweep One Vacuum CleanerReference: 1057
Xiaomi Roborock Sweep One - successor to the first version of the popular Mi Vacuum Cleaner robotic vacuum cleaner. For cleaning floors and carpets, with maximum suction power up to 2000Pa. In addition to the first generation, it also offers wet cleaning. The vacuum cleaner is fully automatic and you can control it through the application.
You might also like
After a very successful first-generation Mi Vacuum Cleaner robotic vacuum cleaner, Roborock Sweep One comes with Roborock Sweep One and Roborock S50/S55 . The design of the vacuum cleaner remains very tasteful and elegant and will fit into every flat. At the top of this page, we have 3 control buttons - the charging button (the vacuum cleaner returns to the charging station), the on / off button and the cleaning button for the selected location.
As we all know it well, Xiaomi still has something to adjust and improve on its products.
One of the greatest innovations this robot offers is wet cleaning and vacuuming at the same time. With the previous generation, you can suck your suits perfectly, but this generation can be even wiped out!
With a vacuum cleaner this time you also get a bionic plant filter for 100ml water. It works just like plants that take water from the ground. You can connect it to the vacuum cleaner by simply sliding it to the bottom of the vacuum cleaner until you hear a snap. Always attach a cloth to the bottom of the tank that comes with the vacuum cleaner. Replacement wipes will also soon be purchased on our site.
In this cleaning mode, it can work 45 to 60 minutes to better remove dirt and clean up approximately 125 square meters. Be sure to fill the tray with water and moisten the cloth before using it for the first time.
Wiping works really efficiently, one would say, unexpectedly, to such a simple system.
Strong Japanese NIDEC engine
The base of every quality vacuum cleaner is a good engine. At the Mi Vacuum Cleaner, a powerful Japanese NIDEC engine with a suction pressure of up to 2000P is fitted and a 0.67m3 of air per minute. It is one of the most powerful robotic vacuum cleaners on the market.
A strong engine comes in handy on longer-haired carpets or when vacuuming along the walls, a traditional weakness of other robotic vacuum cleaners. Just use a small round toothbrush that fills the dirt and dust under the vacuum cleaner unit.
All impurities are trapped in a 0.48 liter container and, if necessary, the vacuum cleaner will warn you that the container needs to be emptied. The main brush is loosely placed on the vacuum cleaner, so it can move in the vertical axis to ensure proper pressure on all types of carpets and floors.
The air flow continues from the vessel through a large HEPA filter, where small dust particles are trapped and the vacuum cleaners are not discharged back into the room. The filter is washable this time , which is certainly a great news for allergy and asthmatics.
It overcomes barriers and is quieter
Although the new robot is delivered with a greater suction power (2000Pa max), it comes with a soft cotton and porous air sieve cap and reduces noise from the original 61-72 dB to 54-67 dB.
Most robots have trouble crossing the thresholds in the rooms, so they can only vacuum the room where you place them. However, this robot has installed the wheels and can overcome barriers up to 2cm high. The first robot could only overcome them to a height of 1.5cm. Yes, even a pole centimeter sometimes plays an important role, so if your thresholds are so high, your new vacuum cleaner will squeeze out all the rooms in the apartment without your supervision.
With the attached water tank, however, the robot can do a bit of a problem because it prevents a complete inclination of the vacuum cleaner, so it would be advisable to remove the tank from the vacuum cleaner itself.
200Pa Suction power
The vacuum cleaner can be turned on at maximum suction power up to 2000Pa.
On the enclosed animation, you can see that the vacuum cleaner can handle the millet, soy beans and metal balls!
13 sensors for perfect orientation
Ultrasonic radar Laser distance sensor SLAM algorithm.
Roborock sweep one is equipped with thirteen different sensors. That's really unrivaled.
The most advanced is the laser distance sensor. It is up in the crown of the vacuum cleaner that rotates 360 ° and the sensor scans the entire neighborhood of your household 1800x per second. The LDS laser sensor is very similar to that found in modern autonomous autopilot vehicles.
Also in the vacuum cleaner you will find an ultrasonic radar sensor, a stair detector, a detector walls, smoke detector, collision detector, electronic compass, gyroscope, accelerometer, distance gauge, fan speed meter, and lift detector if someone picks up the vacuum cleaner from the floor automatically stops working.
Based on information from a laser sensor, distance meter, accelerometer, and gyroscope, the optimal vacuuming route in your home is calculated using the advanced SLAM (Simultaneous localization and mapping) algorithm. Three different and powerful processors can be used to quickly calculate the route. This is just another difference from competing cheaper vacuum cleaners that usually evaluate the room trace on the basis of collisions with fixed obstacles, they do not have first-class orientation in space and therefore a relatively large part of the area can not effectively suck.
The wall detector serves to be tidy along the walls and at the same time do not hit the vacuum cleaner. The vacuum cleaner runs along the wall at a precisely defined distance of 10mm and a small round toothbrush cares to make this 10mm space perfectly clean.
Intelligent Carpet Detection - The new feature, once the vacuum cleaner detects the carpet, turns on the maximum mode for the best possible vacuum. It returns to normal mode as soon as the robot leaves the carpet. Everything is fully automatic.
The other sensors are a pair of ultrasonic sensors in the front, transmitting and receiving signals at 340m / s and detecting the distance between the vacuum cleaner and the fixed obstacle. It does not happen that the vacuum cleaner will hit the glass door, for example.
Four of the stair detector sensors keep the vacuum cleaner away, the distance meter measures the distance between the vacuum cleaner and the automobile.
You can also forget to roll over your hair because the new vacuum cleaner is designed to prevent hair from getting stuck in the engine. Clearly, of course, the previous generation was not a problem, but why not worry less, though?
Other supportive sensors will then only see the work of the vacuum cleaner and remind users if there is anything to be done. If you accidentally forget to insert a HEPA filter trap in the vacuum cleaner before you start, it will again remind you of one of the sensors and the vacuum cleaner will not start its operation to avoid damaging the collected impurities of the internal component.
5200mAh Li-Ion battery
Roborock Sweep One is armed with a high-capacity Li-Ion battery, p capacity5200mAh. Articles come from renowned LG / Panasonic companies, as well as the popular Powerbaniek.
This capacity is sufficient when fully charged up to 2.5 hours of continuous vacuuming, up to 250m2 of space. Of course, it always depends on specific conditions and ruggedness.
The battery charge level indicates an oval frame around the vacuum cleaner buttons. When it is white, the battery has more than 50% of the capacity, if it is amber, it is charged between 20-50%, but if it starts to flash red, the battery has a capacity of less than 20%. But it does not have to worry you, the vacuum cleaner automatically interrupts the operation, goes to the charging station itself, and then recharges when it stops.
Mi Home application
Smart home control center.
Last but not least, great news brings control applications for your smartphone! The new robot features 3 processors that track its real-time motion. The device can be navigated by simply tapping a certain Area you want to clean up and the rest of it takes care of itself. You can also create a virtual wall in your app and the vacuum cleaner will not get you into the space you do not want. With this great feature, you can easily control your vacuum cleaner even from home, track the entire cleaning process, schedule cleaning time, and even name your new assistant!
The app is great to be connected via your Xiaomi account to all the smart home appliances anywhere in the world. You do not have to be at home to start sucking the floor or to check how much you have at home.
In the case of the Roborock Sweep One, you can plan MiTome when and how often to vacuum it, or give it a one-time instruction to vacuum, even if you are sitting at work. You can also control suction power and see the route the vacuum cleaner has gone through during work
Check out our videos from unboxing and launching.
Every Xiaomi Roborock Sweep One ordered with us will include the following
- Roborock Sweep One vacuum cleaner in white
- Vacuum charging station
- European plug-in adapter
- Cleaning brush for cleaning brushes from hair and other dirt
- Step-by-step instructions along with a vacuum cleaner + video guide
Warranty: 24 months
*** automatically translated ***
- Other features:
- Engine power 58W, suction pressure up to 2000pA, 13 sensors, SLAM route calculation algorithm, washable HEPA filter, wall cleaning, 140 ml water tank, rubber bumper
- 350x353x965mm (vacuum cleaner); 230x109x129mm (charging station)
- 14.4V / 5200mAh Li-Ion, built-in, up to 2.5 hours vacuuming
- ABS plastic
- Output voltage:
- 20V (charging station)
- Output current:
- 2,2A (charging station)